Powersolve C(AC) Series Manuel d'utilisateur télécharger pdf (Page 1)

www.powersolve.co.uk

Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England

Tel:01635 521858 Fax: 01635 523771 Email: [email protected]

Specification

50-22 kWatts

• CE Marked LVD & EMC

• 1-4 Outputs

• 5-400 Volts Output

• Eurocassette or Wall Mount

• Parallel Redundant Operation

• Fully Wired Customised Racks

• Power Factor Correction Modules

C (AC-DC) Series

Input

DC Input Voltage • See Table

AC Input Voltage • See Table

Input Frequency • 47-440 Hz

No-Load Input Current • 3% of full load current typical

Inrush Current • AC/DC limited by thermistor

DC/DC depends on impedance of supply

line, see List of Options for Option ‘I’

Earth Leakage • <3.5 mA at 230 VAC, to EN60950

Output

DC Output Voltages • See Table, for voltages above 250 VDC

contact Sales Office

Switch-On Time • 100 ms typical C300-C4700,

500 ms typical C5600-C5800

Hold-Up Time • AC/DC increases with input voltage

15 ms typical at 230 VAC

DC/DC depends on input voltage

(typical 2 ms at 12 VDC)

Line Regulation • 0.1% (±10% change Vin)

Load Regulation • 0.2% (10-90% load)

Transient Response • 6% maximum deviation 2ms

C300-C4700, 10ms C5600-C 5800

recovery time to within 1% for load

change 20-100- 20% of full load

Ripple & Noise • ≤1% +30 mV pk-pk

(0.5% typical lin. regulator auxiliary)

Overvoltage Protection • Standard on single output models &

main output on multi output units

Overload Protection • Current limited at 105-110% of full load

Temperature Coefficient • 0.02%/°C typical

Remote Sensing • Standard for main output

General

Efficiency at Full Load • 60-95%, depending on model

Isolation • EN60950 Class 1

Switching Frequency • Approx. 33 KHz

MTBF • AC/DC & DC/DC approx 130,000 hrs

at +25 °C

Connector • H 15 DIN 41612 or studs for higher

current outputs C300-C4700,

studs only for C5600-C5800

Environmental

Operating Temperature • -20 °C to +75 °C, derate from +55 °C

at 2.5%/°C (Optional -40 °C to +75 °C)

Storage Temperature • -40 °C to +85 °C

Relative Humidity • 5-95%, non-condensing

EMC & Safety

RFI-Interference • VDE 0878, EN 55022, Level A

Construction (Safety) • EN60950 Class 1

Creepage Distance • VDE 0110, 4 mm

Air Distance • VDE 0110, 3 mm

High-Energy • ENV 50142, Level 3

Pulses/Surges

Spike/Bursts • IEC 1000-4-4, Level 3

UPS/INVERTERS

1 2 3 4 5 6 7 8